AVP4-ES100 – Compact ES100 Amplifier
AuviTran’s AVP4-ES100 is a configurable dual 20W/8Ω or quad 10W/8Ω integrated stand-alone EtherSound digital power amplifier.
AVP4-ES100 is ideal for Public Address and Voice Alarm systems.
Build-in AVP4-ES100 parametric equalizers and Dynamic Range Control (DRC) allows speaker and room correction to enhance audio quality and intelligibility in any environment.
AVP4-ES100 is able to automatically detect priority announcement messages and switch on with selectable nominal value level output, thanks to a smart automated software programmable trigger.
Speaker fault monitoring at any time allows remote and local alerts in case of speaker failure.
Standard RJ45 and fast-wiring connectors are available for EtherSound links, to allow a ridiculously easy and fast installation.
A set of 4 GPI and 4 GPO makes the AVP4-ES100 locally or remotely controllable.
GPOs connector are configurable to be used as standard RS232 interface or 150mW headphones output.
|Size||145 mm x 40 mm x 202 mm|
|Power Consumption||<50 Watts|
|Power Supply||100-240V~ 50/60Hz 1.4A Max (Phase / Neutral / Earth)|
|Storage: Temp/Humidity (non-condensing)||-5°C to 70°C / Max 95%|
|Operating: Temp/Humidity (non-condensing)||0°C to 50°C / 5% to 90%|
|Connectors||1×6 pole Euroblock connector (pitch 5.08mm) for AC power supply; 1×4 pole double row Euroblock connector (pitch 3.81mm) for speaker output; 1×6 pole double row Euroblock Connector (pitch 3.81mm) for GPIO. 2x RJ45 connectors for network connections. 2×4 pole Euroblock Connectors (pitch 3.81 mm) for network connections.|
|Outputs||Up to 4 extracted from any of the 128xEtherSound™ channels(64 upstream or 64 downstream)|
|Total Output Power||2x20W RMS or 4x10W RMS outputs under 8Ω loads / 150mW Headphones output|
|Frequency response||20Hz – 20Khz @ -3dB|
|GP In||4x Opto-isolated. +60Vdc maximum input voltage.|
|GP Out||4x +60Vdc/1A open drain Darlington per GPO. Internal +24Vdc available (100mA max).|
|OS Supported||Windows XP/Vista/Seven, 32 and 64 bits|
|ES-Monitor||ES-Monitor enables to remotely set, control and monitor an EtherSound network and provides enhanced control pages to manage the AVP4-ES100 specific parameters.|
|Development Tools||A high-level AuviTran Application Programming Interface, IP based, can be provided to the third-party developer to provide direct access to the internal parameters via a PC program, subject to certain terms and conditions.|