Package Avs-FirmwaresBundle_25.09.12

• AVBx3 version: 5.008

• Fix: No more change of clock configuration when configuration change detected.

• AiC-CORE-X-A7-FPGA version: 2.032

• Add the "Mute Slot" capability

• AiC-CORE-X-A7-FPGA-TDISPLAY versions: 2.032 / 1.020

• Fix: [Screen] Wait until Core available no timeout if FPGA detected.
• Fix: [Screen] GUI encoder, hide higlight border after timeout
• Fix: [Screen] Wait FPGA bitready if available to write flash, add readonly, FSDR bit.
• New: [Matrix] New communication bus for extended memory management
• New: [Matrix] Management of cards up to 128ch
• New: [Matrix] Management of matrix up to 128ch
• New: [Matrix] Integrated mixer for versions with embedded front panel display
• New: [Screen] Add legacy front led pannel mode at startup time
• New: [Screen] Long press on button in main view switch view to "legacy led mode Core-X", exit of this view by long press on the button again
• New: [Screen] Improve UI page main, clock, preset, IP
• New: [Screen] Manage IP address
• New: [Screen] Toolbox identify and remote brightness management
• Fix: [Screen] Sleep screen was locked when pressing button

• AiC-xCore version: 2.052

• Fix some rare cases of internal processor freezing, leading to a potential non-working device
• New feature : signal generator

• AVBx7 version: 4.051

• Last changes since version 3.030
• - Systick_Timer optimizations
• - Error returned for direct access to a wide area rather than an SPI dependency
• - Added a timeout error when accessing Mailbox
• - Force DDR_LVDS after register loading and scene loading
• - Implemented the UPI16 protocol
• - Implemented UID_FUNC(SET, GET, DEL, LOCK, LIST)
• - Moved UID memory to BSS (RamAHB32_UID) so that it is shared by Core M0 and M4
• - Renamed axc_upi_m0 (.c and .h) to axc_upi_core
• - Error returned for UPI4, UPI8: command received when the device was locked to UPI16
• - The WHO? Returns a forced PRT of 16 when the device is locked.
• - Support for AxC_MEM_PAGE_UID for cards with UID key page functionality.
• - Checking with AxC-MADI that AxC_MEM_PAGE_UID data is correctly loaded.
• - Added an event when the IP address or mask changes in automatic mode (APIPA/DHCP).
• - Added a magic key for internal (i.e., non-external) access to mailboxes.
• - Works correctly with AxC_MADI since MADI version 3.004.
• - Fixed incorrect spelling of UPI_ERROR_UNDEFINED.
• - Added the Matrix (slot 14) to the list of Card that may manage protection
• - Fixed AxC_FLASH_CMD_UID to 0x19 and set 512ms as max delay for this command
• - Correction of GET_WIDE_AREA macro to bypass wide AxC_AREA_DIRECT_ACCESS
• - Added setting SDR/DDR setting to audio cards and Matrix before a save, after a load registers or a load of preset
• - Added setting SR1 Master flags to audio cards before a save (Was already done after a load registers or a load of preset)
• - Update SDR/DDR setting periodically to avoid side effect in case of pushing legacy SDR setting externally without save
• - Correction of Overflow check on write violation
• - Check destination slot validity before processing it in MailBox processing (i.e. enabling to save the source in QOS)
• - Manages ASP pages in Preset when parameter Save/Load is set
• - Added unlock protection at start when no card is inserted
• - Added flash erasing of UID protection if reset to factory is done by display without card in slots
• - Added Audio ToolBox type (AVBx7 or 3,...) in ERR&TST of slot 14 to display correct information at startup
• - Automation managed over a wide area where possible
• - Initialized Automation old values after a load scene if Automation was set in both Automation request settings and Saved settings
• - Added a new format for loading/saving scenes in CoreX
• - Save/load automation names into the scene (old saved scenes did not retain automation names)
• - Loading the scene reloads information from old saved scenes without automation names

• AxC-GPIO-Wclk version: 2.003

• Changes from version 2.000:
• - Changed GPIO struct to comply with new mapping of registers between 0x0E-0x13
• - Increment the level of each Interrupt (i.e. decrement all priority interrupts)
• - Replaced NVIC_SystemReset by AxC_Flash_Cmd_Reset() that restart 1st Boot...to bypass potential issue with new LPC1114
• - Low level modification of SSP interrupt handler to bypass transmission of bad value when TX Fifo is empty
• - Fix wrong reads value of the GPIO/WCLK from AVSMonitor during flash erasing and writing
• - Version Compiled with MCUXpresso
• - Added name page registers

• ALP-AES67-A7 versions: 1.190 / 3.002

• New kernel 1.8.1
• NMOS: add IS-04/05 version to advanced pages
• NMOS: senders/receivers list empty after registry failure with mDNS
• NMOS: prevent users to use web port for NMOS
• fix ICMP for unicast stream
• NMOS: receiver label not updated until source is patched
• NMOS: device/node properties inconsistent at startup
• NMOS: improved registry failover resilience
• prevent from restarting if IP is renewed when FW updating
• Device remote command not acknowledged with command reboot
• network vulnerabilities: disable ICMP timestamp responses
• support for create/listen sources/sinks in the multicast range 224.x.x.x and x.x.x.255
• Remove ASIO clock RAVENNA stream reservation limitation
• audio mute when ST-2022 sink stops receiving on secondary port on 3-NIC devices on some configurations
• fix on allowing custom I2S module to have 0 inputs or 0 outputs
• Use default web service.
• Improve audio bloc to allow asymetric driver (Play without Record and opposite)

• ALP-DANTE-A7 versions: 1.190 / 11.030

• UPI8 Evolution
• Improve audio bloc to allow asymetric driver (Play without Record and opposite)

• AVDT-BOB-AE4IO versions: 3.027 / 1.005

• Fix: threshold display
• Fix: output configuration for AVDT-AMP-PA30.
• Fix: flash error on writing 256 bytes on superior boundaries.
• New : Add new mixer in grid mode .

• AVW-DT4I versions: 2.131 / 5.007

• Fix: Reduce WHO delay up to 7ms?
• Fix: Improve DT4oB audio quality of Bluetooth for new bluetooth module

• AxC-ADSP versions: 2.021 / 2.044

• New: Handle UPI8 wide memory mode.
• New: Handle UPI8 FPPR access.
• New: Creation of memory area for encryption keys.
• New: Update webService.
• Fix: Memory free errors.
• Fix: TCP ACK timeout was too short wait now at leat 25ms, before resend tcp data.

• AxC-AES67-A7 versions: 2.012 / 3.002

• New kernel 1.8.1.
• Fixed card renaming.
• Fixed FPGA & Stack AES67 initialization.
• New version of internal communication bus
• Management of the 128ch version
• Fix some rare cases of internal processor freezing, leading to a potential non-working device
• Fixed UPI8.
• NMOS: add IS-04/05 version to advanced pages
• NMOS: senders/receivers list empty after registry failure with mDNS
• NMOS: prevent users to use web port for NMOS
• fix ICMP for unicast stream
• NMOS: receiver label not updated until source is patched
• NMOS: device/node properties inconsistent at startup
• NMOS: improved registry failover resilience
• prevent from restarting if IP is renewed when FW updating
• Device remote command not acknowledged with command reboot
• network vulnerabilities: disable ICMP timestamp responses
• support for create/listen sources/sinks in the multicast range 224.x.x.x and x.x.x.255
• Remove ASIO clock RAVENNA stream reservation limitation
• audio mute when ST-2022 sink stops receiving on secondary port on 3-NIC devices on some configurations
• fix on allowing custom I2S module to have 0 inputs or 0 outputs
• Use default web service.

• AxC-AT32IO version: 4.018

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Fix some rare cases of internal processor freezing, leading to a potential non-working device

• AxC-AVB versions: 2.103 / 2.039 / 8.086

• Improved loading procedure.
• Improved PLL management.
• Fix some rare cases of internal processor freezing, leading to a potential non-working device.
• Improved fallback / media clock management.
• Creation of memory area for encryption keys
• Fix potential wrong vumeter display when changing sample rate.
• Fix MVU ( Device not show with Hive > 1.3 )
• Bypassing clock management with Milan Manager with multiple AVB cards in the same toolbox.

• AxC-AE8M version: 2.026

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Fix some rare cases of internal processor freezing, leading to a potential non-working device

• AxC-AS16MO-V2 version: 1.025

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• New version of internal communication bus
• Fix some rare cases of internal processor freezing, leading to a potential non-working device

• AxC-AX4M version: 4.028

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Fix some rare cases of internal processor freezing, leading to a potential non-working device

• AxC-AX4I version: 7.026

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Fix some rare cases of internal processor freezing, leading to a potential non-working device

• AxC-CN32IO version: 2.023

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Fix some rare cases of internal processor freezing, leading to a potential non-working device

• AxC-DANTE versions: 2.062 / 11.030

• Fix Rio mode .
• Fix device name too long.
• Evolution waiting end of FPGA initialization.
• New version of internal communication bus.
• Fix some rare cases of internal processor freezing, leading to a potential non-working device.
• Creation of memory area for encryption keys
• Fix potential wrong vumeter display when changing sample rate

• AxC-DANTE-A7 versions: 1.024 / 11.030

• Fix Rio mode .
• Fix device name too long.
• Evolution waiting end of FPGA initialization.
• New version of internal communication bus.
• Fix some rare cases of internal processor freezing, leading to a potential non-working device.
• Fix on internet reset signal for Brooklyn module

• AxC-DX8I version: 6.034

• Change some internal I/O number registers to read-only
• DMA page is no longer loaded (when exists) to avoid rare cases of undesired registers writes at load
• Fix some rare cases of internal processor freezing, leading to a potential non-working device

• AxC-ES100 version: 3.008

• Bug fix on PID that could disable the ASIO capability

• AxC-GPIO16 version: 2.005

• Changes since version 2.003:
• - Rajout des CNAPR
• - Modification du cycle de gestion des GPIO de 50ms à 1ms

• AxC-MADI versions: 12.029 / 3.006

• Last changes since version 1.038
• - Compiled for MCUXpresso 25.6
• - Managed UPI8 FPPR functions via new coreX
• - Aligned code with format/macro/struct used in CoreX
• - Added Mailbox Timeout error
• - Fixed flash write issue on unknown area
• - Creation of encryption key pages
• - Manage UPI16 protocol
• - Reduce the UID refresh period from 1s to 20ms
• - Force a UID refresh at end of FPPR UID command processing
• - Fixed AxC_FLASH_CMD_UID to 0x19 and Max delay to 512ms for this command
• - Fix potential wrong vumeter display when changing sample rate
• - Fix IP auto mode change IP on reconnection
• - Fix memory access in wide mode

• AxC-MADI_SFP versions: 12.029 / 3.006

• Last changes since version 1.038
• - Compiled for MCUXpresso 25.6
• - Managed UPI8 FPPR functions via new coreX
• - Aligned code with format/macro/struct used in CoreX
• - Added Mailbox Timeout error
• - Fixed flash write issue on unknown area
• - Creation of encryption key pages
• - Manage UPI16 protocol
• - Reduce the UID refresh period from 1s to 20ms
• - Force a UID refresh at end of FPPR UID command processing
• - Fixed AxC_FLASH_CMD_UID to 0x19 and Max delay to 512ms for this command
• - Fix potential wrong vumeter display when changing sample rate
• - Fix IP auto mode change IP on reconnection
• - Fix memory access in wide mode

• AxC-SWD5G version: 1.010