Package Avs-FirmwaresBundle_23.11.16

• AVBx3 version: 5.007

• Update code with the latest functions to manage the new AxC firmware
• Optimization of start-up time
• Bypass of the old method of reading the serial number when (S/N == 0) or (S/N == 0xFFFF)
• - Allows in supervisor mode to force a new S/N on an old firmware core without S/N
• Resolve ASRC management on AVBx3 without matrix
• - AxC-ADSP should be in slot 2 when in ASRC mode
• Fix the change to a new clock source that is not locked
• The lock status of a card with multi sources only reflect the current source...

• AiC-xCore version: 2.047

• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers

• AVBx7 version: 2.122

• Last changes since version 2.115
• Added internal counters to check/force Mute and Master (Left/Right) settings on each slot with an AxC card connected.
• Wait few ms after sending RESET_SLAVE_DEVICES to coprocessor before resetting AxC-Cards to bypass ZYNQ-AES67 reset issue.
• Disable/Enable when changing the AxC SPI speed when selecting a new slot)
• Added the temperature in Generic CSPR part of CoreX providing the surface temperature max of Core and AxC-Cards.
• Optimization of the CSPR+1 page structure
• Added fan/temperature management for AxC cards when available.
• Added fan jumper management on AVBx3M

• AxC-GPIO-Wclk version: 2.000

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold

• ALP-DANTE-A7 versions: 1.062 / 10.047

• Fix invalid flash commands.
• Fix timer management.
• Add external synchronisation capablity.
• New Spi V2 with brooklyn3.
• Fix leds management.
• Fix mute management for proper VuMeters behaviour.
• Fix "lock" bit now always asserted

• AVDT-BOB-AE4IO versions: 3.021 / 1.005

• Fix disconnection with several web BOB page open
• New gain management db R68-2000 / dBu / dB legacy

• AVW-DT4I versions: 2.105 / 5.006

• New: Update Ultimo-X to v4.2.8.2 Ultimo-X Audinate kernel.
• Fix: Bluetooth timeout discover too shortly.

• AxC-ADSP versions: 2.003 / 1.044

• New UPI8 communication protocol

• AxC-AES67-A7 versions: 1.013 / 1.022

• New AxC-AES67 card

• AxC-AT32IO version: 4.013

• Fix lock/sync incorrect information when card is not the rack clock source
• Fix load/save error due to a wrongly defiined coprocessor

• AxC-AVB versions: 2.095 / 2.039 / 8.072

• Fix IP static configuration
• Fix AVBx not detected when AxC-AVB is in slot 1
• Fix and improve of the redundancy at 96 kHz.
• Fix incorrect UPI network control for slot 0 GPIO_WCLK
• Fix clock domains 1722.1 enumeration.
• Fix ethx MAC address.

• AxC-AE8M version: 2.020

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AS16MO-V2 version: 1.017

• Add new feature : Digital Trim
• Management of AKM Codecs

• AxC-AX4M version: 4.022

• Flash access commands optimization to speed-up firmware update
• Fix the one-sample delay between even and odd channels
• Mute and Phantom functions are unlocked by default in factory settings
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AX4I version: 7.021

• Flash access commands optimization to speed-up firmware update
• Fix the one-sample delay between even and odd channels
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-CN32IO version: 2.018

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-DANTE versions: 2.050 / 10.045

• Fix invalid flash commands.
• Fix timer management.
• Fix name management without Yamaha mode.
• Fix Rio mode with brooklyn3.
• New Spi V2 with brooklyn3.

• AxC-DANTE-A7 versions: 1.004 / 10.045

• Fix invalid flash commands.
• Fix timer management.
• Fix name management without Yamaha mode.
• Fix Rio mode with brooklyn3.
• New Spi V2 with brooklyn3.

• AxC-DX8I version: 6.026

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-ES100 version: 27.012

• Bug fix on PID that could disable the ASIO capability

• AxC-GPIO16 version: 2.002

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold
• Provides relay activation status for GPOs

• AxC-MADI versions: 12.012 / 1.038

• Fix special functions (Digico/Raw mode) that was not restored at power-up

• AxC-MADI_SFP versions: 12.012 / 1.038

• Fix special functions (Digico/Raw mode) that was not restored at power-up

• AxC-SWD5G version: 1.010