Package Avs-FirmwaresBundle_23.03.22

• AVBx3 version: 5.006

• Update code with the latest functions to manage the new AxC firmware
• Optimization of start-up time
• Bypass of the old method of reading the serial number when (S/N == 0) or (S/N == 0xFFFF)
• - Allows in supervisor mode to force a new S/N on an old firmware core without S/N
• Resolve ASRC management on AVBx3 without matrix
• - AxC-ADSP should be in slot 2 when in ASRC mode

• AiC-xCore version: 2.047

• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers

• AVBx7 version: 2.114

• Latest changes since version 2.111
• - Bug Fix on SPI access for new card based on Artix7
• - Gives access to SPI settings for each slot in a new QOS page
• - Bug fix introduced in version 2.108 where new mailbox/UPI8 detects a wrong write violation over AxC-Mem page 127
• - Adjust SPI speed on CoreX Artix 7 for AxC-Card managing Burst to 18Mhz max

• AxC-GPIO-Wclk version: 2.000

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold

• AVDT-BOB-AE4IO versions: 3.021 / 1.005

• Fix disconnection with several web BOB page open
• New gain management db R68-2000 / dBu / dB legacy

• AVW-DT4I versions: 2.070 / 5.005

• Fix: AV-Wall-DT4o line out gain default value.
• Fix: Bluetooth available when bluetooth module not plugged.
• Fix: AV-WALL initializiation failed whith Ultimo-X 4.2.6.5 configured in static ip address.
• Fix: Firmware version not visible in Dante Controller
• Fix: Incorrect UPI8 error code returned.
• Fix: DT4o all level metters idle when no audio signal is detected channels 3/4.
• New: Dante Ultimo-X Firmware updated to version 4.2.6.5.
• New: Common firmwares for all the AV-Wall.
• New: UPI8 protocol support for an easiest remote control integration.
• New: Dante command to erase user parameters.
• New: Enable WHO DELAY frame to reduce the broadcast answer storm of UPI WHO? frame.

• AxC-ADSP versions: 2.003 / 1.044

• Update web service.
• Fixed Backup & restor functions.
• Improved reliability on the internal audio bus. Improved reliability on the internal data bus.
• New filters : allpass first and second order,, notch, high shelf, low shelf, bandpass.
• Add phase plot.
• Improvement GUI mixer scrolling.

• AxC-AT32IO version: 4.012

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AVB versions: 2.095 / 2.039 / 8.071

• Fix IP static configuration
• Fix AVBx not detected when AxC-AVB is in slot 1
• Fix and improve of the redundancy at 96 kHz.
• Fix incorrect UPI network control for slot 0 GPIO_WCLK
• Fix clock domains 1722.1 enumeration.

• AxC-AE8M version: 2.020

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AS16MO-V2 version: 1.015

• Fix issue on channels 12/16 on Daughter Mic boards equipped with PCM ADC
• Fix issue on phantom power not activated on daughter card

• AxC-AX4M version: 4.022

• Flash access commands optimization to speed-up firmware update
• Fix the one-sample delay between even and odd channels
• Mute and Phantom functions are unlocked by default in factory settings
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AX4I version: 7.021

• Flash access commands optimization to speed-up firmware update
• Fix the one-sample delay between even and odd channels
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-CN32IO version: 2.018

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-DANTE versions: 2.050 / 10.035

• Internal memory compatible with UPI8 protocol.
• Flash access commands optimization to speed-up firmware update.
• Improve security access on some internal registers.
• Add UPI8 protocol .
• Add Brooklyn-III support.
• Add IT management.
• Fix Rio mode on AxC-16MO cards.

• AxC-DANTE-A7 versions: 1.004 / 10.035

• Reliability improvement on internal memory access (rare read errors)
• Add support Rio mode for new AXC-16MO mk2
• Internal memory compatible with UPI8 protocol
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add UPI8 protocol
• Add Brooklyn-III support.
• Add IT management.
• Fix Rio mode on AxC-16MO cards.

• AxC-DX8I version: 6.026

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-ES100 version: 27.011

• Bug fix AD8HR
• Big fix on AxC-Mem move for size >= 255

• AxC-GPIO16 version: 2.002

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold
• Provides relay activation status for GPOs

• AxC-MADI versions: 12.012 / 1.038

• Fix special functions (Digico/Raw mode) that was not restored at power-up

• AxC-MADI_SFP versions: 12.012 / 1.038

• Fix special functions (Digico/Raw mode) that was not restored at power-up

• AxC-SWD5G version: 1.010