Package Avs-FirmwaresBundle_23.03.06

• AVBx3 version: 5.003

• Update code with the latest functions to manage the new AxC firmware
• Optimization of start-up time
• Bypass of the old method of reading the serial number when (S/N == 0) or (S/N == 0xFFFF)
• -> Allows in supervisor mode to force a new S/N on an old firmware core without S/N

• AiC-xCore version: 2.047

• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers

• AVBx7 version: 2.111

• Latest changes since version 2.072
• - Integration of the new UPI8 protocol allowing better memory management by zone
• - The UPI8, accelerates and secures memory accesses and simplifies the control of the Audio ToolBox by third-party software
• - New extended MailBox command implemented to speed up exchanges between AxC boards with network access and CoreX
• - Memory management by zone (TAS, TAR, WRITE and READ) on several pages
• - Fix Rise/Fall automation initialization and processing
• - Fix problem on ASRC when inserting a new card without ASRC after the AxC-ADSP card
• - Optimization of the management of "presets" which speeds up and solves many problems when changing the frequency between scenes
• - Optimization of feedback and loading of "presets"
• 1) Updating a firmware no longer prevents access to the last saved "presets"
• 2) Differences of cards in the slots no longer prohibit access to saved "presets"
• - Optimization on Preset Recall for AxC-ADSP card(s)
• 1) Whatever the selection => Forces the saved mode only if (current mode!= saved mode)
• 2) If Param is selected => Force the saved scene only if (AxC-ADSP in DSP mode) && (current scene!= saved scene)
• - Optimized FPPR command requiring flash unlock
• - Added management of Mailboxes awaiting response from an FFPR and CSPR command to avoid internal deadlocks and reduce response times
• - Optimization of the management of FPPR actions (backup, deletion, ...)
• - Fix an issue where GPIO-WCLK could become undetectable after saving
• - Fix an issue on warm restart using reset button
• - Added a 1.5% drift compensation to every SPI speed to manage IRC max drift
• - Adding code to avoid writing in protected page1
• - Adding new functions to simplify timer and delay management
• - Optimizing start-up audio frequency drift

• AxC-GPIO-Wclk version: 2.000

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold

• AVDT-BOB-AE4IO versions: 3.019 / 1.005

• Fix: AVDT-AMP SCP Delay command error.
• Fix: GPIO distant was not working.
• Fix: no more restart on ip frame error.
• Fix: New GUI for IP controller configuration.
• New: UPI8 protocol management.
• New: Ultimo - Add Split-Dante-Ctrl switch configuration: allow to split port: In this mode Main Port is only used for Ultimo (Dante) and Aux Port only for control interface.
• Update: UltimoX4 to Audinate version 4.2.6.5

• AVW-DT4I versions: 2.070 / 5.005

• Fix: AV-Wall-DT4o line out gain default value.
• Fix: Bluetooth available when bluetooth module not plugged.
• Fix: AV-WALL initializiation failed whith Ultimo-X 4.2.6.5 configured in static ip address.
• Fix: Firmware version not visible in Dante Controller
• Fix: Incorrect UPI8 error code returned.
• Fix: DT4o all level metters idle when no audio signal is detected channels 3/4.
• New: Dante Ultimo-X Firmware updated to version 4.2.6.5.
• New: Common firmwares for all the AV-Wall.
• New: UPI8 protocol support for an easiest remote control integration.
• New: Dante command to erase user parameters.
• New: Enable WHO DELAY frame to reduce the broadcast answer storm of UPI WHO? frame.

• AxC-ADSP versions: 2.003 / 1.044

• Update web service.
• Fixed Backup & restor functions.
• Improved reliability on the internal audio bus. Improved reliability on the internal data bus.
• New filters : allpass first and second order,, notch, high shelf, low shelf, bandpass.
• Add phase plot.
• Improvement GUI mixer scrolling.

• AxC-AT32IO version: 4.012

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AVB versions: 2.095 / 2.037 / 8.070

• Fix AVBx not detected when AxC-AVB is in slot 1
• Fix and improve of the redundancy at 96 kHz.

• AxC-AE8M version: 2.020

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AS16MO-V2 version: 1.012

• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function
• Fix issue on channels 4/8 on Mic boards equipped with PCM ADC

• AxC-AX4M version: 4.022

• Flash access commands optimization to speed-up firmware update
• Fix the one-sample delay between even and odd channels
• Mute and Phantom functions are unlocked by default in factory settings
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-AX4I version: 7.021

• Flash access commands optimization to speed-up firmware update
• Fix the one-sample delay between even and odd channels
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-CN32IO version: 2.018

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-DANTE versions: 2.050 / 10.033

• Internal memory compatible with UPI8 protocol
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add UPI8 protocol
• Add Brooklyn-III support
• Add IT management

• AxC-DANTE-A7 versions: 1.004 / 10.033

• Reliability improvement on internal memory access (rare read errors)
• Add support Rio mode for new AXC-16MO mk2
• Internal memory compatible with UPI8 protocol
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add UPI8 protocol
• Add Brooklyn-III support
• Add IT management

• AxC-DX8I version: 6.026

• Reliability improvement on internal memory access (rare read errors)
• Flash access commands optimization to speed-up firmware update
• Improve security access on some internal registers
• Add the lock parameters function

• AxC-ES100 version: 27.011

• Bug fix AD8HR
• Big fix on AxC-Mem move for size >= 255

• AxC-GPIO16 version: 2.002

• Firmware optimization
• Reorganization of GPI treatment with 2 couples of input voltage threshold (VIL1, VIH1) and (VIL2, VIH2)
• Provides information status of validity for the GPIs with these 2 couples of input voltage threshold
• Provides relay activation status for GPOs

• AxC-MADI versions: 12.011 / 1.037

• Flash access commands optimization to speed-up firmware update
• Internal memory compatible with UPI8 protocol
• Improve security access on some internal registers
• Add the lock parameters function
• Invert MADI stream WordClock phase, to be aligned with others devices clock phase
• Improve and fix "lock/sync" information in the clock status window (especially when there is no input stream)
• Improve security on the clock source selection register
• Add an Emergency Clock when working behind an ASRC card without MADI input stream

• AxC-MADI_SFP versions: 12.011 / 1.037

• Flash access commands optimization to speed-up firmware update
• Internal memory compatible with UPI8 protocol
• Improve security access on some internal registers
• Add the lock parameters function
• Invert MADI stream WordClock phase, to be aligned with others devices clock phase
• Improve and fix "lock/sync" information in the clock status window (especially when there is no input stream)
• Improve security on the clock source selection register
• Add an Emergency Clock when working behind an ASRC card without MADI input stream

• AxC-SWD5G version: 1.010