AVA4-ES100 Technical Specifications
Mechanical Specifications
145 mm x 40 mm x 203 mm. 5.5" x 1.4" x 8".
Technical Specifications
| General | |
| Size | 145 mm x 40 mm x 203 mm |
|---|---|
| Power Consumption | <5 Watts |
| Power Supply | 12VDC 0.4 A or 100-240VAC |
| Storage: Temp/Humidity (non-condensing) | -5°C to 70°C / Max 95% |
| Operating: Temp/Humidity (non-condensing) | 0°C to 50°C / 5% to 90% |
| Connectors | 1x2 pole Euroblock connector (pitch 3.81 mm) for DC power supply; 2x3 pole double row Euroblock connector (pitch 3.81mm) for analog inputs and outputs; 1x6 pole double row Euroblock Connector (pitch 3.81mm) for GPIO. 2x RJ45 connectors for network connections. |
| Audio I/O | |
| Number of i/o | Up to 4 mono audio inputs and/or outputs software selectable (2xAin+2xAout, 2xAin+1xSPDIF, 2xAout+1xSPDIF) |
|---|---|
| Inputs | 2 Analog Inputs Inserted in any of the 128xEtherSound™ channels(64 upstream or 64 downstream) |
| Outputs | 2 Analog Outputs , 1 SPDIF output (Stereo) extracted from any of the 128xEtherSound™ channels(64 upstream or 64 downstream) (1) (2) |
| Audio Specifications | |
| Sampling Frequency | 44.1 kHz / 48 kHz |
|---|---|
| A/D and D/A resolution | 24 bits |
| Frequency response | 20Hz – 20Khz @ +/-0,2 dB |
| Dynamic Range | > 100 dB |
| Total Harmonic Distortion | < -95 dB |
| Input Specification | Balanced analog, +22dBu, +10dBV or -44dBu (jumper), <100 Ω Impedance – 12V Phantom power available for microphone |
| Output Specification | Servo-balanced, +22dBu, 22,2 kΩ Impedance, 127dB/1dB step digital attenuator |
| GPIO Specifications | |
| GP In | Opto-isolated. +60Vdc maximum input voltage. |
|---|---|
| GP Out | +60Vdc/1A open drain Darlington per GPO. Internal +12Vdc available (100mA max). |
| Serial interface | RS232 Rx/Tx serial port interface (3) |
| Development and Integration Environment | |
| OS Supported | Windows XP/Vista/Seven, 32 and 64 bits |
|---|---|
| ES-Monitor | ES-Monitor enables to remotely set, control and monitor an EtherSound network and provides enhanced control pages to manage the AVA4-ES100 specific parameters. |
| Development Tools | A high-level AuviTran Application Programming Interface, IP based, can be provided to the third-party developer to provide direct access to the internal parameters via a PC program, subject to certain terms and conditions. |
(1) SPDIF output replace GPO2 by jumper selection
(2) When only 2 outputs SPDIF and analog output play the same EtherSound channels
(3) Serial port replaces GPO3 & 4 by jumper selection
Previous page: AVA4-ES100 Control Page Overview
Next page: AVP4-ES100 Main Features