AVS-Monitor History

Stable release: V6.82.26 (May2023)

  • Download this release
    • Evolution: Multi webview management .

    • Evolution: New gain management (R68-2000 recommandation ).

    • Evolution: New save all AVBx presets.

    • Evolution: New MILAN-certified AVB firmware.
    • Evolution: Support for AxC-Dante-A7 cards.
    • Evolution: New internal communication protocol (performances x8).
    • Evolution: Added new automation AxC card not present.
    • Evolution: Added IP address in the control view.
    • Evolution: Added presets backup and restore functions.
    • Evolution: Added ‘reset to factory settings’ on one slot only.
    • Evolution: Added check the new firmware for AV-WALL and AVDT-BOB.
    • Fixed: SWD5G reverse configuration.
    • Fixed: DSP channels name with space.
    • Fixed: DT4I advanced vs standard mode.
    • Fixed: DT4IO IP address.
    • Fixed: WebServices installation.
    • Fixed unmanaged automations.

V6.78.14.11860 released on March, 2022

  • Download this release
  • What’s new

    • Evolution: Add automations features.
      • Automatic or manual fallback on events type, media stream or clock.
      • Full control of the Toolbox functions – preset, matrix, flow control, gain,etc – on different triggers GPI, network event etc.
      • Full redundancy DANTE/AVB/MADI/AES…
    • Evolution: Add new AxC-16M familly .
    • Evolution: New monitoring multi user on the same toolbox .
    • Evolution: AES42 power management .
    • Evolution: Manage more than 500 devices .
    • Evolution: Adding status of the AxC-Card with background color.(Red:Error, Yellow :Firmware not up to date, Blue:redundant mode).
    • Evolution: Support new BOB AMP device .
    • Evolution: Add AxC-card background color status .
    • Evolution: Add R_PAAD / MILAN redundancy .
    • Evolution: New filters on DSP card : allpass first and second order, notch, high shelf, low shelf, bandpass.
    • Evolution: Add phase plot on DSP filters.
    • Evolution: improved clock management .
    • Evolution: automatic removal of obsolete firmwares.
    • Evolution: AVS-Monitor automatically detects a new release candidate or stable version and he suggest a background download to install it.
    • Fixed: AxC-ES100 versions management .
    • Fixed: AxC-ES100 clock management.
    • Fixed: RSTP settings on the SWD5G cards.
    • Fixed: Reload offline configuration with SWD5G cards.
    • Fixed: Channel name management.
    • Fixed: Remove old password management in AVS-Control Panel.
    • Fixed: AxC-Dante, channel lost when the card reboot.
    • Fixed: max gain correction on GUI for the DT4O.
    • Fixed: Slot setup direct access after empty slot.
    • Fixed: Load offline configuration.
    • Fixed: AVS-Monitor crash after NXAMP setup change.
    • Fixed: Rio mode configuration for new Ax16M card family.
    • Fixed: AVBx Slot configuration if you have an empty slot.
    • Fixed: H1 GUI.
    • Fixed: Remote access on service.
    • Fixed: GUI for Ax16M familly.
    • Fixed: Backup and restore function for AVDT-BOB and AxC-DSP cards.
    • Fixed: Reload offline configuration.
    • Evolution: Restoration of a configuration with relative offset (independent of firmwares versions).
    • Evolution: New network configuration choice for the AxC-Dante on AES67 mode .
    • Evolution: New firmwares for AVBx.

V6.70.11 released on July, 2020

  • AVS-Monitor for Windows Seven and Windows 8/10,
    32/64 bits OS

    • What’s new

    • Evolution: Support New card AxC-16M / AxC-16O.
    • Evolution: Support New AV-WALL-DT2I device.
    • Evolution: New MILAN firmware for AxC-AVB.
    • Evolution: New AxC-Dante firmware with AD8HR bug Fix.
    • Evolution: New GUI for DT4I mode classic and expert.
    • Evolution: New vu-meters for DT4I.
    • Evolution: Support New AV-Wall DT2I device.
    • Evolution: Support New card AxC-8M / AxC-8O.
    • Evolution: Add Agora H1.
    • Evolution: New optimized Toolbox control view.
    • Evolution: New optimized AVS-WebBrowser.
    • Evolution: Bluetooth GUI for DT4I / DT4O .
    • Evolution: New firmware for DT4I / DT4O
    • Evolution: New firmware for AVDT-BOB.
    • Evolution: Add IP management on AxC-AVB Control port.
    • Fix: SFP cage management on SWD5G /R (Special thanks @ludo M.) .
    • Fix: GUI screen management and memory leak .
    • Fix: Ethersound AD8HR restor parameters from file .
    • Fix: NXAMP Unknow settings.
    • Fix: AVDT-BOB / DT4I Mixer master vu-meter.
    • Fix: Ethersound integrity.

V6.64.00 released on Febuary, 2020 .

  • AVS-Monitor for Windows Seven and Windows 8/10,
    32/64 bits OS

    • What’s new

    • Evolution: New firmware for AVDT-BOB.
    • Evolution: New firmware for AxC-AVB.
    • Evolution: New firmware for Axc-Dante.
    • Evolution: Auto save new sample rate.
    • Evolution: Add new AVDT-BOB AEG6IO.
    • Fix: NXAMP conflict with NeMo.
    • Fix: AxC-AVB information.
    • Fix: EtherSound discovery.

V6.52.00 released on November, 2019 .

  • AVS-Monitor for Windows Seven and Windows 8/10,
    32/64 bits OS

    • What’s new

    • Evolution: Add new Dante API 4.2.2.4.
    • Evolution: Add new AVDT-BOB AEG6IO.
    • Evolution: Add permissive mode on firmware update for support.
    • Evolution: New devices exchanges stack with more security.
    • Evolution: Add new AxC-AVB card support.
    • Evolution: Add Clock loopback detection (AVBx on Dante / Dante on AVBx).
    • Fix: Alarmes false positives.
    • Fix: Mouse scroll crossing.
    • Fix: Firmware update window proposition.
    • Fix: Nxamp setup.
    • Fix: AVS-Monitor / NeMo conflict.
    • Fix: End of TFTP server task.

AVS-Monitor version V6.34.00 released on July, 2019 .

  • AVS-Monitor for Windows Seven and Windows 8/10,
    32/64 bits OS

    • What’s new

    • Evolution: Add DT4O support.
    • Evolution: Add new features for AxC-Dante.
    • Evolution: New Dante API with DDM.
    • Evolution: Integrated firmware management.List of available
      packages.
    • Evolution: Add backup and restore settings management for AVDT-BOB and AxC-DSP.
    • Evolution: Add Filter on AuviTran device.(Special thanks @ludo )
    • Evolution: Add Mixer management on AV-DT4I.
    • Evolution : Include latest firmwares.
    • Evolution : Automatic detection if firmware not up to date.
    • Integrated screen sharing support.
    • Fix IHM freez on firmware update if Dante device locked.
    • Fix: Network interface not show on Control Panel.
    • Fix: Shutdown AVS-TFTPServer on new installation.
    • Fix: Gain value on Ax4M IHM when Rio mode is activate. (Special thanks @ludo )
    • Fix: Mixer Master vu meter. (Special thanks @Jose )
    • Fix: Slot Setup on last slot. (Special thanks @Jose )
    • Fix: Abusive disconnection alert.

AVS-Monitor version v5.12.00 (r5490) released on August, 2018

  • AVS-Monitor for Windows Seven and Windows 8/10,
    32/64 bits OS

    • What’s new

    • Same v5.11.64.5354 with new certificates Microsoft Authenticode.
    • Evolution: Support new device AV-WALL .
    • Evolution: New GUI for analogic devices on ToolBox.
    • Evolution: Update monitoring GUI.
    • Evolution: Rewrite start phase.
    • Evolution: Rewrite Web Gateway.
    • Evolution: Suppress automatic installation of EtherSound drivers.
    • Evolution: Neumann DMI gateway integration.(special thanks to Alain)
    • Evolution: Net-Patch and IO Path are optional, see AVS-ControlPanel AVS-Monitor section.
    • Evolution: Add new Digigram OEM card.
    • Evolution: Add Dante device locked information.
    • Evolution: Supervision of clock synchronisations.
    • Evolution: New firmware viewer.
    • Evolution: Add informations on Dante Clock configuration .
    • Evolution: Add Dante Clock configuration proposition.
    • Evolution: New version presentation on firmware manager.
    • Evolution: Short name on net-patch for AVBx.
    • Evolution: Automatic clock settings after factory.(special thanks to Ludo)
    • Evolution: Automatic SRC on AES/EBU input after factory.
    • Evolution: Firmware manager optimisation.
    • Fix : SWD5G settings.
    • Fix : WebView locked.
    • Fix : Monitoring conflicts.
    • Fix : EtherSound dependancy.
    • Fix : JavaScript on Edge/Win10.
    • Fix : Monitoring channels already use on matrix.
    • Fix : Service socket management.
    • Fix : Dante service wrapper.
    • Fix : Eq. management on DSP device.
    • Fix : Fix show io-patch.
    • Fix : Fix AVS-Monitor freeze after PC standby.
    • Fix : Fix Name management on old device (EtherSound).
    • Fix : Fix Monitoring save parameters.
    • Fix : Fix BOB links.
    • Fix : Fix DSP vu meters.
    • Fix : Fix DSP names.
    • Fix : JS library.
    • Fix : AxC-ES100 blink tunnelling.
    • Fix : BOB & DSP Mixer faders values.
    • Fix : DSP Inputs names.
    • Fix : Fix Monitoring and firmware manager.

AVS-Monitor version v5.10.38 (r4746) released on October, 2017

  • Download AVS-Monitor version v5.10.38
    (r4746)

    • What’s new

    • Evolution: AVS-service performance optimisation (x2) .
    • Evolution: AVS-monitor AVBx GUI optimisation (x4).
    • Evolution: Backup guarantee of ES registers on AVBx.
    • Evolution: Monitoring all audio channels on AVBx7 and AVBx3M. (New
      firmwares mandatory, see AVS-Firmware updater )
    • Evolution: New page with accurate vu meters.
    • Evolution: Save status “Disable CTL+SHIFT” confirmation.
    • Evolution: Add alert if log are enable.
    • Evolution: Suppress obsolete settings options.
    • Evolution: GUI evolution for AVDT-BOB.
    • Evolution: Monitoring EtherSound Network, on minimized mode.
    • Evolution: Monitoring AVBx, on minimized mode (UPI or Dante devices), alarms on:
      • AVBx internal temperature > 68°.
      • AVBx Main and secondary alimentations.
      • SWD5G Ethernet port disconnected.
      • SWD5G Ethernet port error.
    • Evolution: Multiple network interface supervision.
    • Evolution: Support new AxC-ADSP software with Digital Signal Processing. (special thanks to Ludo &
      Charly)
    • Evolution: New optimized AVS-WebBrowser for Digital Signal Processing GUI
    • Evolution: New Digigram EtherSound Drivers.
    • Evolution: New Rebuild Matrix (New firmwares mandatory, see AVS-Firmware updater ).
    • Fix:Save scenes on JavaScript GUI.
    • Fix:Vu-meters page.
    • Fix:DSP setting on AVBx3.
    • Fix:DSP and bob GUI Fader management.
    • Fix:Madi setting on AVBx3.
    • Fix:AxC-Dante Rio mode with new Firmware.
    • Fix:BOB Output vu-meters.
    • Fix:Restore from flash.
    • Fix:EtherSound runtime installation.
    • Fix:EtherSound DSR history.
    • Fix:Monitoring with latest core firmware.

AVS-Monitor version v5.9.96 (r3886) released on April, 2017

  • Download AVS-Monitor version v5.9.96 (r3886)

    • What’s new

    • Evolution: new kernel AVS-service.
    • Evolution: manage audio ToolBox @96 khz (New firmwares mandatory, see
      AVS-Firmware updater       ) .
    • Evolution: support new board ADSP on frequency converter mode.
    • Evolution: unlock tunnelling on AxC-Dante with AxC-AX4M .
    • Evolution: Nxamp direct control Gain/Array Eq/HeadRoom/Delai.
    • Evolution: Add AVBx serial num on config.
    • Evolution: AVDT-bob add new properties.
    • Evolution: New gain management for analog boards A8IO / AX4M / AX4I / AX48 (special thanks to Charly) .
    • Evolution: Support new boards AXC-MADI-SFP .
    • Evolution: AxC-Madi support DiGiCo mode.
    • Evolution: AxC-Madi support Legacy mode.
    • Evolution: AxC-Madi DiGiCo commands tunnelling.
    • Evolution: “AXC-SWD5G Easy redundancy” RSTP activation by port (BOB Redundancy by example).
    • Evolution: AXC-AX4M graphics.
    • Evolution: New Features for RME Mictasy / YouCan FanConvert (Ouput Setup A/D) (special thanks to Alain).
    • Evolution: Add LINK function on BOB IHM for stereo inputs and outputs management.
    • Evolution: Add GPIO management for BOB (DE8IO/DX8IO) – Firmware>0x117 mandatory – .
    • Evolution: Add Memory Preset management on AVBx3M and AVBx7 – Firmware>0x149 mandatory – .
    • Evolution: Permanent deactivation of CTRL+SHIFT confirmation.(special thanks to Alain)
    • Evolution: Optional confirmation to loading Macro.(special thanks to Alain)
    • Fix: Use Digigram LX6464 on network interface for EtherSound.
    • Fix: NXAMP contol.
    • Fix: EtherSound network automatic change on AVS-Control Panel.
    • Fix: Bob Output vu-meters if input is muted.(special thanks to Ludo)
    • Fix: Bob Eq. and compressor fader synchronisation on remote action.
    • Fix: CPU usage optimization.
    • Fix: AVDT-bob fix graphic equalize.
    • Fix: Service don’t restart after standby.
    • Fix: AVDT-BOB backward compatibility.
    • Fix: AVDT-BOB Mouse Wheel.
    • Fix: Vu-meters on Matrix.
    • Fix: Scroll on AVBx.
    • Fix: Macro memory on AVBx.
    • Fix: Automatic RSTP control.
    • Fix: MADI ip change.
    • Fix: AVBx3M name.

AVS-Monitor version v5.8.23 (r2664) released on May, 2016

  • Download AVS-Monitor 5.8.23 (r2664)

    • What’s new

    • Evolution change clock representation.
    • Evolution robust backup of AVBx.
    • Evolution robust EtherSound command.
    • Evolution management of audio channels for AxC-Dante / AxC-ES100 / AxC-MADI boards.
    • Fix EtherSound network Discovery on same network.
    • Fix IP management for MADI boards.
    • Fix random crash during AVBx7 detection.

AVS-Monitor version v5.8.19 (r2594) released on May, 2016

  • Download AVS-Monitor 5.8.19 (r2594)
  • Warning, for ToolBox only(AVBx3 and AVBx7) : This new release manage labels of devices and channels on device
    memory rather than computer, for better interconnection and shared informations. Unfortunately, this mode is
    incompatilble with previous management of labels, you can lost labels of device or channels.
  • To use previous label management : On Control Panel (Expert Mode) select AVS-Monitor Tab, and check “Use
    obsolete label management on file only.”

    • What’s new

    • Evolutions, support label on AVBx Matrix with NetPatch Link.(Charly & Matt request evolution)
      • To rename devices on control page, left click on device name:
      • To rename devices on Matrix or net patch, right click on device name.
      • To rename channels on Matrix or net patch, right click on channel name.
      • To rename channels on control page, left click on channel name.
      • To rename Switch port on control page, left click on port picture.
    • Evolutions, new Equalizer for NEXO NXAMP.
    • Evolutions, New light config pannel.(Ludo request evolution)
    • Evolutions, new screen for AVDT-BOB.
    • Evolutions, Support hight screen resolution.
    • Evolutions, new clock management.
    • Evolutions, prepare for the support of 96k (soon available).
    • Evolutions, Add range and stream type on matrix. (Benoit P. request evolution).
    • Evolutions, Add vu-meters on Matrix.
    • Evolutions, Add Multicast filter on switch.(soon available)
    • Evolutions, Dynamic network management.
    • Evolutions, Manage Wireless network on Dante/UPI network interface.
    • Evolutions, Instant access night/day background.(Charly request evolution)
    • Evolutions, Toolbox fluidity, control, VU meters optimisation.
    • EtherSound network discovery optimisation.
    • New certificat for Windows10.
    • Fix NXAMP Eq. window size.
    • Fix Dante device detection and control.
    • Fix AVDT-Bob view on Window10.
    • Fix Load configuration on device with differents firmwares versions.
    • New Digigram EtherSound driver for Windows 10

AVS-Monitor version 5.2.3 Release Notes

  • Download
    AVS-Monitor 5.2.3 (r1909)

    • Evolutions, manage new board AVBx DR18IO.
    • Evolutions, manage new device AVDT-BOB.
    • Evolutions, add automatic groups for NXAMP and NX242 devices.
    • Evolutions, new tools to manage net-Patch.
    • Change presentation by network input devices, or network output devices.
    • Import / export connections with new format:
      • sourceAlias@deviceAlias -> destinationAlias@deviceDevice
      • destinationAlias@deviceAlias <- sourceAlias@deviceAlias
    • Optimise your net-patch with rebuild tools.
    • Fix net reset.
    • Fix Group Management.
    • Fix AVBx configuration backup.
    • NXAMP setup download sturdiness.
    • Network discovery optimization for EtherSound devices.
    • Fix Empty slot on AVBx.
    • Many fix on net-patch:
      • Fix scroll during patch.
      • Fix collapse device.
      • Fix phantom cross-point.
      • Fix multi-select.
      • Fix AVM500 Matrix.
      • Fix alias on AVBx net-patch.
      • Fix crash .
    • Fix select new device on hierarchy view.
    • Fix no devices found after Net-Reset.
    • Fix AVS-Monitor Auto-reconection.

Changes in AVS-Monitor from version 5.1.4

  • Download
    AVS-Monitor 5.1.4
    • Evolutions, manage new board AVBx DR18IO.
    • Evolutions, manage new device AVDT-BOB.
    • Evolutions, add automatic groups for NXAMP and NX242 devices (Joseph C. request evolution).
    • Evolutions, new tools to manage net-Patch.
    • Change presentation by network input devices, or network output devices.
    • Import / export connections with new format:
      • sourceAlias@deviceAlias -> destinationAlias@deviceDevice
      • destinationAlias@deviceAlias <- sourceAlias@deviceAlias
    • Optimise your net-patch with rebuild tools.
    • Fix net reset.
    • Fix Group Management.
    • Fix AVBx configuration backup.
    • NXAMP setup download sturdiness.
    • Network discovery optimization for EtherSound devices.
    • Fix Empty slot on AVBx.
    • Many fix on net-patch.
      • Fix scroll during patch.
      • Fix collapse device.
      • Fix phantom cross-point.
      • Fix multi-select.
      • Fix AVM500 Matrix.
      • Fix alias on AVBx net-patch.
      • Fix crash .
    • Fix select new device on hierarchy view.
    • Fix no devices found after Net-Reset.
    • Fix AVS-Monitor Auto-reconection.

Changes in AVS-Monitor from version 5.0.8 to 5.1.4

  • Download AVS-Monitor 5.0.8
    • Fix net patch integrity.
    • Recast initialisation.
    • Fix save configuration.
    • Add protections on Macros.
    • Add confirmation to quit AVS-Monitor (Nicolas G. request evolution).
    • Add auto-mute on I/O Patch conflicts (Alain R. request evolution).
    • Support several network interfaces on the same subnetwork ( wireless & cables ).
    • Add NXAMP status of download setup.
    • NXAMP setup recovery download if last session was interrupted.
    • Softer integrity tests for Digigram and Fostex products.
    • Fix MATRIX mode on AVBx7.

Changes in AVS-Monitor from version 5.0.7 to 5.0.8

Changes in AVS-Monitor from version 5.0.3 to 5.0.7

  • Download AVS-Monitor 5.0.3
    • Fix splash loop on startup.
    • Fix Matrix AUTO/MANUAL configuration on AVBx7.
    • Nexo NXAMP optimizations.
    • Fix DANTE IP & Name management.
    • Fix NetPatch synchronisation.
    • Fix AVBx3 and AVBx7 save configuration.
    • Fix long duration device reset.
    • Fix URL/Documentation access.
    • Fix menu of AVS-Monitor if service not started.
    • Fix short key on new release / Documentations / Web site.
    • EtherSound configuration évolutions.
    • Add name of AxC-ES100 on rack.
    • Add mouse wheel on MATRIX and NXAMP.

Changes in AVS-Monitor from version 4.2.8 to 5.0.3

  • Download AVS-Monitor 4.2.8
    • Improvement of Optimization andRobustness.
    • Fix random crash on node change.
    • Fix netpatch.
    • Fix save config empty file.
    • Optimization of Dante discovery networks.
    • Fix net reset.
    • Fix TOOLBOX save config.
    • Lock IHM during long processing.
    • Add mouse wheel management on NetPatch and TOOLBOX pages.

Changes in AVS-Monitor from version 4.2.7 to 4.2.8

Changes in AVS-Monitor from version 4.2 to 4.2.8

AVS-Monitor software:

  • Control page
    • AxC-SWD5G : New setup and monitoring interface
    • AxC-MADI : New setup interface
    • Added toolbox management through UPI devices
  • NetPatch page
    • Routing algotrithm corrected

AVS-Service software:

  • Service can be launched even if Dante or EtherSound drivers are missing
  • Added AVS-UPI device control

Installation:

  • Setup script improved

Changes in AVS-Monitor from version 4.1.6 to 4.2

AVS-Monitor software:

  • Control page
    • AxC-DANTE : Remote ID up to 15

AVS-Service software:

  • Performance issues corrected

Installation:

  • New setup script

Changes in AVS-Monitor from version 4.1 to 4.1.6

AVS-Monitor software:

  • Control page
    • AVBx3/AVBx7 : Global information GUI corrected
  • NetPatch control
    • AVBx3/AVBx7 Matrix alias loading improved

AVS-Service software:

  • DANTE device disconnection/reconnection algorithm corrected

Changes in AVS-Monitor from version 4.0 to 4.1

Changes in AVS-Monitor from version 4.0 to 4.1

AVS-Monitor software:

  • NetPatch control
    • Added a waiting icon while patching is in progress
    • Improved agorithm
    • New exception cases added
  • Load/Save
    • Corrected load procedure
  • Macro management
    • Corrected macro algorithm on reload

AVS-Service software:

  • DANTE device discovery algorithm corrected

Changes in AVS-Monitor from version 3.20.0 to 4.0

AVS-Monitor software:

  • Global functions
    • DANTE device discovery added
    • DANTE device IP setup included
    • DANTE device name management included
  • New Control Pages
    • AuviTran AxC : Matrix window available for both AVBx7 and AVBx3 (view only).
    • AuviTran Toolbox : New AxC-SWD5G control page
    • AuviTran Toolbox : Modified slot setup pages
  • Control Pages updated
    • AuviTran ToolBox : DANTE and ToolBox global alias used.
    • AuviTran ToolBox Audio Matrix : Added a waiting icon while patching is in progress.
    • AuviTran AxC-Cards : New detection procedure
    • AuviTran AxC-SWD5G : Setup mode improved, interface feedback enhanced
    • AVM500-ES : Port management corrected
    • NEXO NXAMP : Copy/paste function added
  • NetPatch control
    • Added a waiting icon while patching is in progress
    • Improved agorithm
    • New exception cases added
  • Load/Save
    • Corrected secure saved file mode
    • Corrected load procedure
    • AVBx7 Matrix reload improved
    • AxC-SWD5G reload corrected and more accurate
  • Macro management
    • Corrected macro algorithm
    • Improved macro function for AVBx7 Matrix and AxC-SWD5G
  • Offline mode
    • Newly emulated function for AVBx7 Matrix
    • Emulation of AxC-SWD5G added
    • Offline mode corrected for advanced toolbox commands

AVS-Service software:

  • DANTE API added
  • DANTE device discovery algorithm added
  • DANTE IP Setup management added
  • DANTE name setup management added
  • Toolbox name management added
  • ToolBox communication improved
  • Event management corrected

AVS-Event software:

  • New toolbox parameter available

Installation software:

  • DANTE redistribution software added
  • Optional components installation corrected
  • AVS-Monitor documentation updated

Miscellanious:

  • AVS-Monitor User manual updated
  • AVS-Monitor FAQ added

Changes in AVS-Monitor from version 3.18.0 to 3.20.0

AVS-Monitor software:

  • New Control Pages
    • AuviTran AVBx7 : Matrix window added
    • AuviTran Toolbox : New rack setup page management
    • AuviTran Toolbox : New slot setup page management
  • Control Pages updated
    • AuviTran ToolBox : Page reliability improved
    • AuviTran ToolBox : Vu-meter display rebuild for better readability
    • AuviTran ToolBox : Revert to factory function added
    • AuviTran AxC-Cards : improved and corrected management
    • AuviTran AxC-DANTE : Tunneling mode setup added, vu-meters available, channel setup added, alias
      management improved
    • AuviTran AxC-AX4M : Gain range set accoring to tunneling mode
  • NetPatch control
    • Automatic ToolBox in/out alias naming added
    • Improved agorithm
    • New exception cases added
  • Offline mode
    • Responsiveness improved
    • ToolBox offline management improved

AVS-Service software:

  • ToolBox communication improved
  • Communication improved

Installation software:

  • AVS-Monitor documentation updated

Miscellanious:

  • AVS-Editor corrected
  • AVS-Event Editor manages more events

Changes in AVS-Monitor from version 3.17.0 to 3.18.0

Global features:

  • DANTE/EtherSound driver Windows 8 compatibility added

AVS-Monitor software:

  • New Control Pages
    • AuviTran AVBx7 : Control page added
    • AuviTran Toolbox : New setup page management
  • Control Pages updated
    • AuviTran AVBx3 : Page reliability improved
    • AuviTran Toolbox : Vu-meter management rebuild
    • AuviTran AxC-DANTE : Tunneling mode setup added, vu-meters available, channel setup added, alias
      management improved
    • AuviTran AxC-AX4M : Gain range set accoring to tunneling mode
    • NEXO NXAMP : EtherSound and Dante protocol management improved
  • NetPatch control
    • Improved agorithm
    • New exception cases added
  • Offline mode
    • Offline mode device management improved
  • Load/Save cfg file
    • Reload of cfg file improved with warning message addition
    • Save to cfg file more accurate

AVS-Service software:

  • Save to device function improved
  • Communication improved

Installation software:

  • Installation procedure revised for Windows 8 compatibility

Changes in AVS-Monitor from version 3.16.1 to 3.17.0

Global features:

  • DANTE compatible device control integrated

AVS-Monitor software:

  • Control Pages
    • AuviTran AVBx3 : Control page updated
  • NetPatch control
    • Improved agorithm
    • New exception cases added
    • Hardware configuration management corrected
    • Offline mode exception cases added
    • Mute algorithm improved for unused channel
  • Offline mode
    • Offline mode device management improved
    • DANTE Offline mode device management added

AVS-Editor software:

  • New devices list management

AVS-Service software:

  • Reliability improved
  • Memory management improved

Installation software:

  • Installation procedure revised

Changes in AVS-Monitor from version 3.16.0 to 3.16.1

  • Neumann – RCS Software compatibility corrected

Changes in AVS-Monitor from version 3.15.1 to 3.16.0

AVS-ESMonitor software:

  • Control Pages
    • AuviTran AVBx3 : Control page updated
    • Audio Toolbox AVBx3
    • Audio Toolbox eXtension card ES100
    • Audio Toolbox eXtension card AX41
    • Audio Toolbox eXtension card AX4O
    • Audio Toolbox eXtension card AE8IO
    • Audio Toolbox eXtension card AX4M
    • Audio Toolbox eXtension card DX8I
    • Audio Toolbox eXtension card DX8O
    • Audio Toolbox eXtension card AT32IO
    • Audio Toolbox eXtension card MADI
    • Page setup corrected
  • NXAMP control page
  • Control improved
  • GUI corected for future evolution
  • AVRed control Page
  • Link status display corrected
  • NetPatch control
    • Improved agorithm
    • New exception cases added
    • Hardware configuration management corrected
    • Offline mode exception cases added
    • Clock icon added to show pending routing
    • Mute algorithm improved for unused channel
    • SB168 exception case added
  • I/O Patch
    • Hardware configuration management corrected
  • Configuration files
    • Improved and corrected load file algorithm
    • Improved file saving
    • FanMatrix properly included in file saving
    • Added new option to rediscover devices before saving
    • Offline mode loading procedure improved
    • Improved loading feedback when error occured
  • Software features
    • Drag and drop corrected on Windows 7
    • Serial number display corrected

AVS-ESEditor software:

  • New templates added
  • New devices list management

AVS-ESService software:

  • Reliability improved
  • Memory management improved

Installation software:

  • EtherSound API installation procedure revised

Changes in AVS-Monitor from version 3.14.0 to 3.15.1

AVS-ESMonitor software:

  • Control Pages
    • AuviTran AVBx3-ES100 : Control page updated and added
    • Audio Toolbox eXtension card ES100
    • Audio Toolbox eXtension card AX41
    • Audio Toolbox eXtension card AX4O
    • Audio Toolbox eXtension card AE8IO
    • Audio Toolbox eXtension card AX4M
    • Audio Toolbox eXtension card DX8I
    • Audio Toolbox eXtension card DX8O
    • Audio Toolbox eXtension card AT32IO
    • Audio Toolbox eXtension card MADI
    • Page setup updated
  • NXAMP control page updated
  • Aqonda control page updated
  • AVRed control page corrected
  • NetPatch control
    • Improved agorithm
    • New exception cases added
  • I/O Patch
    • Mute function improved
    • Lock I/O function improved
  • Software features
    • New rotary fader algorithm, control improved
    • Night mode added
    • Improved load file algorithm

AVS-ESEditor software:

  • New templates added

AVS-ESService software:

  • Reliability improved

Changes in AVS-Monitor from version 3.12.4 to 3.14.0

AVS-ESMonitor software:

  • Control Pages
    • AuviTran AVBx3-ES100 : Control page added
    • Audio Toolbox eXtension card ES100
    • Audio Toolbox eXtension card AX41
    • Audio Toolbox eXtension card AX4O
    • Audio Toolbox eXtension card AE8IO
  • AuviTran AVY16-ES100 : Control page updated
  • AuviTran AVNF49-ES100 : Control page updated
  • NetPatch control
    • Improved agorithm
    • New exception cases added
  • Software features
    • Improved load file algorithm
    • Added save into memory for all network

AVS-ESEditor software:

  • New templates added

AVS-ESService software:

  • Reliability improved

Changes in AVS-Monitor from version 3.12.2 to 3.12.4

AVS-ESMonitor software:

  • Control Pages
    • AuviTran AVY16-ES100 : Control page updated
  • NetPatch control
    • Improved agorithm
    • New exception cases added
  • Software features
    • Corrected tunneling configuration
    • Improved load file algorithm
    • Added save into memory for all network
    • New event rules added

Changes in AVS-Monitor from version 3.12.1 to 3.12.2

AVS-ESMonitor software:

  • Control Pages
    • AuviTran AVNF49-ES : Control page updated

AVS-EventEditor software:

  • Software features
    • Improved GUI
    • Corrected AVA4-ES100 management

Changes in AVS-Monitor from version 3.11.1 to 3.12.1

AVS-ESMonitor software:

  • NetPatch control
    • Improved agorithm
    • New exception cases added
  • Software features
    • Offline save of SB168-ES/AVKit-ES100 advanced parameters
    • Advanced parameters recall from file for SB168/AVKit-ES100
    • Red dot notification when USR/DSR error detected
    • New device selector
  • Control Pages
    • AuviTran AVM500-ES : Control page updated, control of new firmware
    • AuviTran AVP4-ES100 : Group Control page created
    • AuviTran AVY16-ES100 : Control page corrected for AVKit tunnel target
    • YouCan FANMatrix : Control page added
    • YouCan FANConvert : Control page added
    • Innovason SR16 : Control page added
    • Digigram Aqonda : Control page updated with slider scale

AVS-EventEditor software:

  • Software features
    • Event management integrated

AVS-ESEditor software:

  • Updates
    • Templates updated
    • New templates added

Miscellanious:

  • AVS-ESService corrected
  • Documentation updated

Changes in AVS-Monitor from version 3.11.0 to 3.11.1

AVS-ESMonitor software:

  • Control Page Updates
    • Yamaha M7CL-48ES : Control page updated

Changes in AVS-Monitor from version 3.10.1 to 3.11.0

AVS-ESMonitor software:

  • NetPatch control
    • Improved agorithm
    • New exception cases added
  • Control Page Updates
    • AuviTran AVNF49-ES100 : New control page added
    • NEXO NXAmp : Control page updated
    • Yamaha M7CL-48ES : Control page updated
  • Software features
    • Configuration reloading procedure updated
    • Improved global software reliability

AVS-ESEditor software:

  • Updates
    • Templates updated
    • New templates added

Miscellanious:

  • AVS-ESService corrected
  • Installation procedure revised

Changes in AVS-Monitor prior to v3.10.1

Changes in ESMonitor from version 3.9.4 to 3.10.1AVS-ESMonitor software:

  • NetPatch control
    • Improved agorithm
    • Multiple AVM500-ES Automatic routing
    • Interconnected network display corrected
    • New exception cases added
  • Control Page Updates
    • AuviTran AVNF49-ES100 : New control page added
    • AuviTran AV3rd : New control page added
    • AuviTran AVM500-ES : Control page updated
    • NEXO NXAmp : Control page updated
    • Allen and Heath : Control page updated
  • Software features
    • Configuration reloading procedure updated
    • Improved global software reliability

AVS-ESEditor software:

  • Updates
    • Templates updated
    • New templates added

Miscellanious:

  • AVS-ESService corrected
  • Installation procedure revised
  • Documentation updated

Changes in ESMonitor from version 3.8.0 to 3.9.4AVS-ESMonitor software:

  • NetPatch control
    • AVM500-ES Automatic routing
    • Interconnected network display
    • Interconnected routing display selection
    • Improved algorithm
    • New exception cases added
  • Control Page Updates
    • AuviTran AVM500-ES : Tunneling management improved
    • AuviTran AVY16-ES100 : Control page updated
    • AuviTran AVA4-ES100 : Control page updated

AVS-ESEditor software:

  • Updates
    • Templates updated
    • New templates added

Miscellanious:

  • AVS-ESService reliability improved
  • AVS-ESMonitor correction implemented
  • Installation procedure revised
  • Documentation updated

Changes in ESMonitor from version 3.6.6 to 3.8.0AVS-ESMonitor software:

  • New Control Page
    • NEXO : New NXAMP page added for latest LOAD revision
    • Yamaha : New ESConsole page added
    • Innovason : New Dio8Out page added
  • Control Page Updates
    • AuviTran AVM500-ES : Tunneling management improved
    • AuviTran AVY16-ES100 : Control page updated
    • NEXO NXAMP : Control page corrected
    • NEXO NX242 : Initialization improved
    • Yamaha SB168-ES : Control page updated
    • Digigram Aqonda 8 / 16 : Control page updated
  • Main interface
    • Net Patch : Improved algorithm (new exception case managed)
    • I/O Patch : Inetrface rebuilt
    • Added new “acknowledgement” dialog boxes
    • NEXO NXAMP : Group management implemented for latest load revision
    • New menu options

AVS-ESEditor software:

  • Updates
    • Templates updated
    • New templates added

Miscellanious:

  • Automatic detection of 32/64 bits operating system during installation
  • Documentation updated

Changes in ESMonitor from version 3.6.1 to 3.6.6AVS-ESMonitor software:

  • Net Patch control page
    • Improved AVM500-ES management
    • Improved algorithm (new exception case managed)
  • Control Page Updates
    • AVA4-ES100 : New control page added
    • AVP4-ES100 : New control page added
    • Digigram Aqonda 8 : New control page added
    • Digigram Aqonda 16 : New control page added
    • AVB32-ES100 : Control page corrected
    • NXAmp : Control page corrected
    • AVM500-ES : Control page improved for new tunneling function
  • Main interface
    • Memory usage improved
    • Device management improved
    • New device incorporated
    • Macro button management corrected for Vista OS

AVS-ESControlPanel software:

  • Updates
    • Interface updated

AVS-ESService software:

  • Updates
    • Improved command management
    • Long run session stability improved

AVS-ESEditor software:

  • Updates
    • Templates updated
    • AVM500-ES Dissociated device manamgement added

Changes in ESMonitor from version 3.5.2 to 3.6.1AVS-ESMonitor software:

  • Net Patch control page
    • New options available : Patch propagation, AVM500 Show/Hide
    • Improved AVM500-ES management
    • Improved algorithm (new exception case managed)
    • Updated AVM500-ES allowed patch
  • Control Page Updates
    • AVM500-ES : Control page modified to manage new options
    • AVi64-ES : Control page communication modified
    • AVY16-ES100 : New tunneling target added
    • NX242 : Control page improved
    • NXAmp : Control page improved
    • IOPatch : Tooltip generation corrected
  • Main interface
    • Direct access to netpatch options in main toolbar
    • Memory usage improved
    • New implementation of Save to memory function
    • Rename function corrected for AVM500-ES

AVS-ESControlPanel software:

  • Updates
    • Service interface updated

AVS-ESService software:

  • Updates
    • Improved command management
    • New interface card management
    • Long run session stability improved
    • Device subscription corrected

AVS-ESEditor software:

  • Updates
    • Templates updated

Changes in ESMonitor from version 3.5 to 3.5.2AVS-ESMonitor software:

  • Net Patch control page
    • Algorithm management improved
    • Additional case management added
  • New Control Page
    • AVB32-ES100 : New control page added
    • AVKit-ES100 : New control page added
    • AVRed-ES100 : New control page added
  • Control Page Updates
    • AVY16-ES100 : Redundancy control added
    • NX242 : Setup management corrected and improved
    • NXAmp : Control page improved
  • Main interface
    • Automatic crash report generation
    • New resource added

AVS-ESControlPanel software:

  • Updates

AVS-ESService software:

  • Updates
    • Unstable network management improved

AVS-ESEditor software:

  • Updates
    • Templates updated

Changes in ESMonitor from version 3.4.4 Beta to 3.5Installation package:

  • Updates
    • Running process management modified

AVS-ESMonitor software:

  • Net Patch control page
    • Algorithm management improved
    • Additional case management added
  • Control Page Updates
    • AVI64-ES100 : Control page improved
    • NX242 : Control optimization
    • AVY16-ES100 : Control page imporved and corrected
    • AVFM500-ES : Control page corrected
  • Main interface
    • Right click menu correction
    • BiDir and Ring management switch between online/offline mode corrected
    • New slider response management implemented

AVS-ESControlPanel software:

  • Updates

AVS-ESService software:

  • Updates
    • Direct alias management implemented

AVS-ESEditor software:

  • Updates
    • Templates updated

Changes in ESMonitor from version 3.2.6 to 3.4.4 BetaInstallation package:

  • Updates
    • Running process management modified

AVS-ESMonitor software:

  • Net Patch control page
    • AVM500-ES direct access
    • AVM500-ES internal patch visually different
    • Complete new algorithm management implemented
    • Direct assignment from Input/Output implemented
    • Waiting popup added
    • Improved reactivity
    • Patch display corrected
    • New folding policy
    • Alias automatic display corrected
  • Macro command
    • Fully customisable import from file
    • Quick import of routing/properties/both by single button press
    • Allow ‘drag and drop’ feature in offline mode
    • Macro command management improved
  • Updates
    • New menu design including direct access to right click functions
    • Automatic saving of log included
    • I/O Patch ring mode managmeent improved
  • Control Page Updates
    • AVY16-ES100 : Enable/Disable 3rd port access
    • NX242 : Integration of new LOAD, and specific correction for LOAD2_48 control
    • AVKit for AD8HR : Init phase corrected
    • NetCira MS88 : I/O-1C extension board management corrected
    • AVI64-ES100 : Control page added
    • AVX48-ES100 : Control page added
  • Configuration File management
    • Import of routing/properties/both selection added
    • Auto-assignment function improved
    • Load of corrupted cfg file corrected
    • Log of file loading added
    • Waiting message implemented while loading
    • Selection dialog corrected when using ES100 3rd port
  • Offline mode
    • Import of routing/properties/both selection added
    • Start of loop management added
    • HCF management improved
    • Ring mode management implemented

AVS-ESControlPanel software:

  • Updates
    • New interface
    • New AVS-ESMonitor options included (folding policy, ESMonitor autolog)
    • Non-Ethernet card no longer display as available choice

AVS-ESService software:

  • Updates
    • Start of Loop status management added

AVS-ESEditor software:

  • Updates
    • Major bug issue corrected when editing previously created files
    • Reset counter function added
    • Short alias added for specific devices
    • New template added

Changes in ESMonitor from version 3.2 to 3.2.6AVS-ESMonitor software:

  • AuviTran AVY16-ES100 Control page
    • Control page added.
    • Monitoring and control if device allowed.
  • AuviTran AVYRed-ES100 Control page
    • Control page added.
    • Monitoring and control if device allowed.
  • Updates
    • NetCira MS88 control page corrected.

Changes in ESMonitor from version 3.0.1a to 3.2Installation package:

  • Updates
    • Shortcut creation procedure improved
    • Service update procedure corrected when installation done on version prior to 2.6.1
    • New documentation included
    • No modification of secure parameters when needed

AVS-ESEditor software:

  • Updates
    • Device template correction
    • New device template added
    • AVS-ESEditor version included in generated cfg files

AVS-ESService software:

  • Updates
    • Mute function corrected
    • 3rd Port access functionnality improved
    • Stop procedure corrected
    • Long run session improved
    • Ring mode management improved
    • AVM500-ES dedicated protocol functions added

AVS-ESMonitor software:

  • Updates
    • AVM500-ES offline mode improved
    • Switching offline to online mode management improved
    • Offline mode I/O management corrected
    • AVS-ESMonitor ini files management corrected
    • New EtherSound partners added
    • Offline group management changed
    • Wheel mouse control improved
    • GUI reliability improved when adding/swapping/selecting EtherSound devices
    • Windows Vista compatiblity improved
  • Configuration file management
    • Dedicated symbols for Load cfg GUI
    • Clear/Auto assign buttons added to Load cfg GUI
    • Loading device parameter management corrected
    • Load of cfg file while in offline mode improved
    • Alias import corrected
  • Net Patch control page
    • Refresh corrected after configuration load
    • No network selection corrected
    • Parameter storage improved
    • NX242 integration corrected
    • Mouse/Keyboard control added
  • AVM500-ES control page
    • Matrix secured management corrected
    • Firmware dependant control management improved
    • Dedicated service management added
    • Matrix collapse/expand corrected
    • DIP Switch integration corrected
  • NX242 control page
    • Setup management corrected and improved
    • Group setup management corrected
    • Delay management corrected
    • Gain management corrected
    • Mute group management improved
    • GUI reliability improved
    • Init process corrected
    • Device selection corrected
  • NAI48-ES/MY16-ES64/DME4io-ES/DME8o-ES/DME8i-ES control page
    • Peak/Signal control added when available
    • New emergency clock management added when available
    • Device selection improved
    • I/O init management improved
    • Start ID management corrected
    • Service communication improved
  • Other control page
    • AVY16-ES100: Prototype page added
    • NXAmp: Prototype page added
    • I/O Patch: Bidir status corrected
    • Device Property: GUI modification
    • LED symbol for Signal/Peak improved
    • AVKit for AD8HR: Discovery process corrected

AVS-ESControlPanel software:

  • Updates
    • Vista compatibility improved
    • UAC management added
    • New parameters added

Changes in ESMonitor from version 2.6.1g to 3.0.1aInstallation package:

  • Updates
    • Latest EtherSound API included.
    • Installation procedure improved.
    • EhterSound Vista compatible drivers included.

AVS-ESMonitor software:

  • Updates
    • New control page added.
    • Net Routing page improved.
    • New AD8HR Initialization routine.
    • NX242 Control Page improved.
    • Improved Upstream/Downstream Error feedback
  • AuviTran AVM500-ES Control page
    • Control page added.
    • Monitoring and control if device allowed.
  • Yamaha NAI48-ES Control page
    • Control page improved and corrected.
  • Yamaha DME4io-ES/DEM8i-ES/DEM8o-ES Control page
    • Control page improved and corrected.
  • Yamaha MY16-ES64 Control page
    • Control page improved and corrected.
  • Digigram ES881v2 and ES16161v2 Control page
    • Control page added.

AVS-ESSerivce software:

  • Updates
    • New timeout management included.
    • Command management improved.
    • Save device algorithm improved with Secure option.

AVS-ESControl Panel software:

  • Updates
    • New timeout management included.
    • New ES-Monitor control features added.

AVS-ESEditor software:

  • Updates
    • Windows resize allowed.
    • Improved reliability when loading corrupted configuration file.

Changes in ESMonitor from version 2.6.0-RC2 to 2.6.1gInstallation package:

  • Updates
    • Latest EtherSound API included.
    • Installation procedure improved.
    • Vista compatible installation procedure.

ES Monitor software:

  • Updates
    • Naw control page added.
    • Net Routing page improved.
    • Configuration file loading improved.
  • Yamaha NAI48-ES Control page
    • Control page improved.
  • Yamaha DME4io-ES/DEM8i-ES/DEM8o-ES Control page
    • Control page improved.
  • Yamaha MY16-ES64 Control page
    • New control page added.
    • Control and monitoring of device allowed.

Changes in ESMonitor from version 2.5.1 to 2.6.0-RC2Installation package:

  • Updates
    • Latest EtherSound API included.
    • Installation procedure improved.
    • Softwares and shortcuts naming policy revised.

ES Monitor software:

  • Updates
    • Offline mode implemented.
    • Automatic reconnection to service.
    • Interactive import of configuration files with current network architecture.
    • New functions added like “Clear All”, “Audio Soft locking”, “Audio Mute/Unmute”.
    • No control page added.
    • Net Routing page improved.
    • Keyboard interaction corrected.
    • Control page GUI revised.
    • Configuration done using AVS-ESControlPanel
  • AVY16-ES Control page
    • New firmware version options included.
    • GUI revised.
  • AVKit-ES Control page
    • Initialization corrected.
    • Reload parameter behaviour corrected.
    • Controls behaviour and feedback corrected.
  • NX242 Control page
    • Initialization corrected.
    • Communication improved.
    • Group management corrected.
    • Setup choice improved.
  • Yamaha NAI48-ES Control page
    • New control page added.
    • Control and monitoring of device allowed.
  • Yamaha DEM4io-ES/DEM8i-ES/DEM8o-ES Control page
    • New control page added.
    • Control and monitoring of device allowed.
  • AuviTran AVNF49-ES Control page
    • New control page added.
    • Control and monitoring of device allowed.

ES-Service software:

  • Improvements
    • New timeout policy management.
    • Subscription management improved.
    • Corrections among MUTE command treatment.
    • Serial FIFO management modified.
    • Log file creation corrected.

ES-ControlPanel software:

  • Improvements
    • Configuration page of ES-Monitor completed.
    • New API Timeout management policy.

ES-Editor software:

  • New software
    • Tools to edit/create offline EtherSound architecture.
    • Ability to be called directly from ES-Monitor.

Changes in ESMonitor from version 2.5 to 2.5.1ES Monitor software:

  • Updates
    • Kernel checking for Hardware tunneling updated.
    • F5 Key implemented for a smart refresh of current control tab.
    • Network integrity checking option available through control panel and configuration window.
  • Pinanson Control page
    • Display Pinanson devices configuration.
    • Remote control of all parameters.
    • VuMeter available.
  • Digigram ES16161 Control page
    • Display Digigram ES16161 configuration.
    • Remote control of all parameters.
    • VuMeter available.
  • Digigram ES1241 Control page
    • Display Digigram ES1241 configuration.
    • Remote control of all parameters.
    • VuMeter available.
  • Digigram ES881 Control page
    • Display Digigram ES881 configuration.
    • Remote control of all parameters.
    • VuMeter available.

ES Service software:

  • Improvements
    • MIDI Tunneling algorithm improved.
    • Serial port management modified.
    • Disconnexion detection process improved.

Changes in ESMonitor from version 2.4 to 2.5ES Monitor software:

  • Hardware tunneling feature
    • Allows automatic configuration of hardware tunneling.
    • Configuration check to prevent use of hardware tunneling on incompatible devices.
    • Update control page to display hardware tunneling status.
  • Network Routing page
    • Allows direct and intuitive routing from source to receivers.
    • Quick overview of current patch.
    • Quick view of EtherSound assignment via dedicated icons.
    • Easy navigation thanks to collapse/expand feature.
    • Non available patch automatically greyed.
    • Modification of EtherSound assignement directly available.
    • Change of device/channel alias available through right click.
  • AVB32-ES Control page
    • Display AVB32-ES configuration.
    • Remote control of all parameters.
    • 32 VuMeter available.
    • Direct tunneling controls
  • Log window
    • Traces device disconnection/reconnection.
    • Traces device load/save from memory.
    • Allows saving session to file
  • Updates
    • NX242: Switch between Analog/Digital corrected.
    • Fostex MS8: Extension recognition processed improved.
    • Configuration filename in use displayed in window top control bar.
    • Includes new device recognition.
    • Channel alias displayed above controls on most available control pages.

Changes in ESMonitor from version 2.3 to 2.4Installation process:

  • Installation now includes both EtherSound driver v1.24 and latest version. Note that version 1.24 is
    required to update old AVY16-ES board.

ES Control Panel:

  • Improved presentation of network adapter.

ES Service:

  • Enumeration improved on newly connected/updated devices.

ES Monitor software:

  • General improvements
    • Mouse wheel available for all fader and knob control.
    • External network reset management corrected.
    • Un-needed control on Routing page are now show/hidden automatically depending on device
      configuration.
  • AuviTran AVRed Control page
    • Switch link feature added.
    • Dimmer function added.
    • Relay button behaviour corrected.
  • Yamaha AD8HR Control page
    • Linked AD8HR automatically discovered and remote controlled via single interface.
    • Emergency clock feature added.
    • Lock panel feature added.
    • Initialization process corrected when AD8HR externally controlled by Yamaha device.
  • NEXO NX242 Control page
    • Latest functions fully implemented (see Nexo website for NX242 latests features).
    • NX242 version checking included to prevent use of new functions on old NX242.
  • Fostex MS8 Control page
    • New gain table use for gain remote control.
    • ComboBox feature added to force extension card.
    • Automatic recognition of MI6C extension board.
  • Camco Vortex Control page
    • Daisy chained Vortex feature added, remote control available via a single interface.

Changes in ESMonitor from version 2.2 to 2.3Installation process:

  • Warning

    Version 2.3 is compatible with the latest EtherSound driver 1.27 and above, but due to poor perfomances and
    compatibility problems with firmware update of AVY16-S of this driver, Setup 2.3 will install EtherSound
    driver 1.24c by default, if there is no driver installed or if the driver installed is older. If the
    installed version of the driver is more recent, a warning is displayed asking wether to keep the old version
    or remove it and reinstall ES driver version 1.24c.

  • During installation, a prompt will ask if the new security level management must be installed. It is always
    possible to install it later using the control panel.

ESMonitor software now includes:

  • Security level management
    • ESMonitor is now able to manage “Login session and password” with 3 levels of security (ADMIN, USER,
      GUEST) for controlling the EtherSound Patch and devices Control:

      • ADMIN: EtherSound Patch and device Control available
      • USER: Control available but View only of EtherSound Patch
      • GUEST: View only of EtherSound Patch and device information
    • The setting of this login session can be done during installation or using the Control Panel
  • New ESMonitor control panel page for security level management
  • New Property and Control page available:
    • AuviTran AVRed
    • AuviTran AVKit-ES for AD8HR (EtherSound upgrade kit for AD8HR)
    • Camco Vortex series with EtherSound Interface (preliminary version)
    • Fostex ES6300 (Amplify speaker with EtherSound interface)
  • Improved and new functionnality available for NEXO NX242 Property page
  • VirtualCAI (beta version) enables use of Virtual CAI software from CAMCO for distant control of Vortex
    amplifiers

Changes in ESMonitor from version 2.1 to 2.2Installation process:

  • Automatic reboot when needed

ESMonitor software now includes:

  • Automatic Architecture detection
    • ESMonitor is now able to provide automatic detection of your EtherSound network architecture.
    • Architecture is displayed in a separate tab to allow user view it easily.
  • MIDI Tunneling capability
    • MIDI Tunneling offers capacity to control your Yamaha devices using the appropriate Yamaha software
      control.
    • Automatic detection of Yamaha host if available.
    • Launch of dedicated software is done via AVY-16ES Property page.
  • New ESMonitor control panel
    • More intuitive to understand and use.
    • Timers are now easier to manage.
  • Standby mode management is now taken into account
  • Activity logging of your EtherSound network for long term testing purpose
  • New Property page available:
    • Digigram ES220 and ES220L
    • Digigram ES8In and ES8Out
    • Fostex MS8 page enhanced
    • AVY16-ES page enhanced
  • Service selection via its network name added

Changes in ES-Monitor from version 1.0 to 2.1Installation process:

  • Automatic stop of running services: It is not necessary to stop the service before new installation
  • Documentation included within installer

ESMonitor software now includes:

  • New EtherSound I/O patch page:
    • The management of bidirectional ES device is now available. It includes downstream/upstream channel
      assignment for device I/O and the bidirectional loop back toggle.
    • The I/O mapping from or to EtherSound Channels are done through a Patch Page. The patch could be
      selected on downstream or upstream when Bidirectional capability is available on a device
  • Group management: Adds the possibility to create/delete group of equivalent devices for common control
  • Save/Restore to file: Enables to save to or restore from a file the complete network device configuration
  • Save/Restore configuration of individual device or network into device internal memory.
  • Enhancements for existing control page
    • for AVY16-ES product by AuviTran
    • for ES2Out product by Fostex
  • New control pages added
    • for NX242 product by Nexo
    • for ES8Mic product by Digigram
  • New shortcuts for Load/save in file or device memory
  • Show/Hide networks and group trees capability
  • Complete network reset within ESMonitor
  • User preferences to select if EtherSound channel starts from 0 or 1
© Copyright 2010-2024 - AuviTran S.A.R.L. - Legal disclaimer / Réglementation